The Storage Equipment Manufacturers Association (SEMA) is a major international accreditation body for the storage equipment industry. It administers the SEMA Approved Rack Inspector qualification standard, which is the organization’s certification for individuals who passed the two sets of certification exams on racking systems and their SEMA-promoted technical and safety standards. Passing the two training course modules, Adjustable Pallet Racking and Cantilever Racking, is necessary to get a SEMA racking inspection certification.

The SEMA Approved Rack Inspector is also an accreditation standard that is recognized by the Health and Safety Executive (HSE), a UK government body behind the regulation and enforcement of workplace welfare standards. SEMA Approved Rack Inspector accreditation is mostly used for insurance-related purposes. The HSE recommends a thorough and exhaustive racking inspection to be conducted at least once a year. And each week, a visual check of the racking systems is done and with the inspection results properly logged. This logging method involves filling out a printable rack inspection checklist, to ensure nothing is missed by the inspector. 

What is a racking inspection checklist?

Authorized warehouse inspectors use a racking inspection checklist when they do (ideally) weekly assessments. The assessments will uncover issues in the racking system as well as potential structural faults and risky loading practices that might lead to the collapse of racks. The presence of a certified racking inspector, accomplishing a racking inspection checklist competently and truthfully, is part of the HSE and the Occupational Safety and Health Administration (OSHA)’s push for improved workplace safety. Regular inspections of racks can help prevent warehouse injuries and deaths.

What is the traffic light system?

A standardized risk assessment method called the traffic light system is used by authorized warehouse racks inspectors. The traffic light system, which figures in the racking inspection checklist, is used to monitor and methodically evaluate the current state of critical racking parts such as beams, braces, and frames. 

In the traffic light system for racking inspection, Green Risk signifies minor damage, Amber for significant damage, and Red for critical damage. Green means the racking component is currently safe but a follow-up assessment is necessary in the next inspections. Amber denotes considerable damage and a repair attempt is needed promptly; a racking component labeled Amber is deemed unsafe to carry any load and that no reloading should be made until the component has been certified safe. Red, the most urgent risk level in the traffic light system, calls for an immediate removal of all load on affected bays and replacement of damaged components. The table below summarizes the traffic light system used in racking inspections.

Green RiskAmber RiskRed Risk
Beam1mm – 10mm over entire beam length11mm – 20mm over entire beam length>20 mm over entire beam length
Bracing1mm – 10mm over 1 meter length11mm – 20mm over 1 meter length>20 mm over 1 meter length
Side Impact, Upright1mm – 5mm over 1 meter length6mm – 10mm over 1 meter length>10mm over 1 meter length
Front Impact, Upright1mm – 3mm over 1 meter length4mm – 6mm over 1 meter length>6mm over 1 meter length

Why do you need a racking inspection checklist in printable form?

A printable racking inspection checklist is a must, and not only for insurance purposes and regulatory compliance. Digital checklists can have their data corrupted or end up lost during continued updates. A print-ready racking inspection checklist makes it easy to carry printouts that log the current aisle and bay numbers and their rack conditions, as well as the risk assessments of the accessories, row spacers, and pallets, and share them to service technicians assigned to address the Ambers and the Reds.

Leave a Reply

Your email address will not be published. Required fields are marked *